Supermicro PDSMA+ for Switchvox compatible board

Supermicro PDSMA+

See details at the manufacturer's website

PCI Slot Requirements

Although the system has 6 PCI slots, it is only certified to use three of them for Digium telephony cards. PCI card positioning is extremely important. Placing a card in the wrong slot can result in call quality issues and dropped T1 lines. For Digium cards, use the 3 PCI slots closest to the edge of the motherboard. Since these are 32-bit, 5-volt PCI slots, they are compatible with the following Digium boards:

TDM400P - 4 port analog card
TDM800P - 8 port analog card
TDM2400P - 24 port analog card
TE110P - single port T1 card
TE120P - single port T1 card
TE205P - dual port T1 card
TE207P - dual port T1 card with echo cancellation
TE405P - quad port T1 card
TE407P - quad port T1 card with echo cancellation

 

 

Components

Memory

240-pin DDR2 533mhz, 512mb recommended, 1GB for large installations

Hard Drive

any SATA capable hard drive

Processor

See Supermicro's website for compatible processors. The following processors are recommended:

 

up to 12 simultaneous calls - Intel Celeron 430
up to 24 simultaneous calls - Intel Pentium 4 631
up to 48 simultaneous calls - Intel Core 2 Duo E4500
up to 72 simultaneous calls - Intel Core 2 Duo E6600
More than 72 simultaneous calls - Call Us

Optional RAID card

Adaptec 2410sa SATA RAID controller

Suggested Cases

The following cases have been confirmed to fit the full-height full-depth Digium TDM2400p:

Enlight 7250AK9 Apex Supercase TU-150